How to Build L-Shaped Desks

Posted on

L-shaped desks are wrapping effect desk which are very good for your small home office for its maximum usage. This design L-shaped desk is cheap, easy to assemble and effective. This work will take approximately one hour and an hour and a half to build it.

Instructions of build L-Shaped desks

  1. Cut the sheet of plywood diagonally. Starting with 24 inches (60 cm) on the side of 8 feet (2.5 m). The diagonal cut ends to 24 inches (60 cm) from one end to another timber. Cut the plate 18 inches (45 cm) into four equal parts.
  2. Measure the height of the cabinets and L-Shaped desks. Short plate 1 8 (20 cm 3) into two equal parts. For example, if your filing cabinets are 2 feet (60 cm) tall, the 1 of 8 (20 cm 3) of the board shall be 4 feet (1 m) long.
  3. Paint the plywood and boards 1 of 8 (20 cm 3) and allowed to dry.
  4. Creates a “V” with Tables 1 of 8 (20 cm 3). Bolted joints. Put them in the corner with the tip out.
  5. Place the plywood face down on the floor. Place the slices diagonally to create the “L”.
  6. Check the bottom of the plywood with the width of each cabinet. Riding a trim piece on each side of binder with two screws.
  7. Set the wood around the outside of the table. Iron around the edge so that the bar is sticking with adhesive to wood.
RELATED:   Ideas for Install White Marble Countertops
Tags: l shaped desks